Hardware

Pole Displays - Certified WinPOS and TabPOS
These are the pole displays that we are integrated with: Windows USB: Bixolon BCD 1100 USB: LogicControls PD3000U-BK Serial: TouchDynamics WD-202B Ta...
Thu, 8 Nov, 2018 at 11:30 AM
Pax Store set up (TransIt)
Access the Pax Store: https://paxus.paxstore.us  You Tube for setting up an application in the Pax Store https://www.youtube.com/watch?v=b5PyaaMN9Zo  ...
Wed, 15 May, 2019 at 11:48 AM
Setting up Tab Merchant for EBT and Scale
Setting up Tab Merchant for EBT and Scale The following need to be enable for a merchant needing EBT and scale set up EBT need to flag departm...
Thu, 30 May, 2019 at 4:58 PM
Troubleshooting the Brecknell Scale for Android
Default Settings: BaudRate: 9600 Databits: 8 Stopbits: 1 Parity: NONE This is a list of troubleshooting steps to take when a Brecknell scale is n...
Wed, 12 Jun, 2019 at 11:35 AM
Setup/Install HiSense Tablet
Getting Started with a HiSense tablet on retailcloud POS. Set Up Hardware With equipment removed from packaging, there are 3 ports on the base of the ta...
Mon, 17 Jun, 2019 at 11:43 AM
Pax E500 - cannot update
Problem: Unable to see E500 as online in Pax Store E500 not able to update  RESOLUTION: Must have at least 50% battery charge to install Verify a...
Sat, 29 Jun, 2019 at 6:56 AM
Setup Honeywell Quantum T 3580
This document includes instructions on how to configure a Honeywell Quantum T 3580 USB scanner. There is one page dedicated to dropping and adding check/lea...
Thu, 6 Feb, 2020 at 6:55 PM
Honeywell MS 7120 Scanner
These are codes to transmit the leading 0 and check digit on UPC-E barcodes on the MS7120 Honeywell Scanner. It's best to print them out rather than sc...
Fri, 28 Aug, 2020 at 10:16 AM
NexGo N5 Setup
This is the documentation for the Exadigm N5 setup. The N5 has it's own store through Exadigm like the PAX units. The main difference is that it can on...
Mon, 25 Jan, 2021 at 11:39 AM
CODE Scanner CR5200
The CR5200 is an updated scanner model of the 5000 series. It uses a different set of codes for configuration. By default the only code it does not have is ...
Mon, 18 Oct, 2021 at 9:57 AM