Setting Up Your Hardware
This article is for setting up an 8" CDS on a TouchDynamic Pulse Ultra. This screen is not a standalone pole display, it mounts directly to the back of...
Fri, 26 Jun, 2020 at 5:17 PM
Wrong PDM on PAX Devices I noticed this issue on some PAX Devices (E800) when one received the wrong PDM version. There are 2 different PDM versions...
Thu, 30 Apr, 2020 at 11:13 AM
If it is a star printer then Step#1 you need to connect to wifi and get an ip address . https://www.star-m.jp/products/s_print/tsp100iiiw/manual/en/s...
Fri, 5 Jun, 2020 at 12:47 PM
This configuration includes the following. It might be more helpful to print these out. It can be difficult to scan these on some monitors. Reset to Fac...
Fri, 26 Jun, 2020 at 10:15 AM
To get the SideScanner on the Elo PayPoint to work, the scanner must be in HID mode (Ships in this mode) and the scanner must be set to "Elo" unde...
Tue, 16 Jun, 2020 at 9:21 AM
This article has configuration code for the CR950 to drop the UPC-E number (first digit) and the check digit (last digit) on a UPC-E barcode. It also has co...
Fri, 4 Sep, 2020 at 2:48 PM
This article will tell you how to connect to your Wifi network if you are setting up a new PAX E Series device or changing to a different network. Pres...
Thu, 10 Sep, 2020 at 4:36 PM
The Magellan 9300i scale/scanner is a combination counter device for grocery stores and other stores that need weighing functions. The only configuratio...
Fri, 14 Oct, 2022 at 2:42 PM
This article has instructions for configuring the mC-Print3 Star Kitchen Receipt Printer. It needs to be connected to your network, you need the IP address ...
Tue, 17 Nov, 2020 at 4:39 PM
This article will help you configure your scanner to drop the check digit (last digit) and numbering digit (first digit) on UPC-A barcodes. This is useful i...
Tue, 17 Nov, 2020 at 5:16 PM