These are instructions pushing processing info for terminals built in our app stores.
For ALL applications on all app stores set the batch to close automatically between 10:00PM and 10:30PM with intervals, every 5 minutes, unless they request another time. This will avoid issues with merchants getting their money at the end of the day.
Transit Multipass on Tsys (aka Transit)
Requirements:
TA Username (created when tsys account is setup, merchant should have received an email)
TA Password (created when tsys account is setup, merchant should have received an email)
MID from Tsys (12 digits)
Terminal ID (14 digits)
Notes:
Terminal ID is usually 00XX, take last two digits and combine with MID to create Terminal ID
Most people are running on this, most common setup.
For merchants with multiple Terminals, the next Terminal ID after 01 might not be 02. It depends on how the IDs are setup.
Merchants on this Build: Most merchants
First Data Rapid Connect Nashville Valuelink (aka FDRCNV)
Requirements:
Merchant ID (Nashville ID)
Alternate Merchant ID (Nashville ID)
Terminal ID: (Sometimes this should be 7 digits, sometimes it should be 8 with a 0 before the TID)
GroupID or GroupNumber: (5 digits, for Nashville 10001)
Notes:
Alternate Merchant ID should match Merchant ID
Terminal ID might be 8 digits, leads with 0 or it will be 7 digits
When Using an A920 or a E800 for the FIRST TIME and registering it, it should AUTOMATICALLY register its DATAWIRE ID. Unless it has a previous DID on it, then it must be manually registered, follow this document.
NOTE1: Registering that terminal id the first time binds that TID to the device permanently. From now that TID can only be used on that device. If you need that TID on a different device you must create a NEW one.
Merchants on this build: RanknRally
Sierra on Tsys (aka Sierra)
Requirements:
Terminal Number (4 digits)
Merchant Number (12 digits)
Merchant City
Merchant Name
Merchant State
City Code (zipcode)
Currency Code 840
Country Code US
Merchant Category Code (SIC)
Terminal ID Number (8 digits)
Bank Identification Number (BIN)
Agent Chain Number usually 000000
Store Number (4 digits)
Agent Bank Number (6 digits)
Other Settings:
EMV On
P2PE off
Notes:
Terminal ID Number will start with a V (vnumber). Change the V to 7 so it is 7XXXXXXX.
Merchants on this Build: Super7
EPX through NAB (EPX Processor-HC-Retail-S300, not verified yet)
Requirements:
Merchant Number
DBA Number
Terminal Number
Customer Number
MAC
Auto Batch Time
Merchants on this build: Britex