The document is meant to be used with the retailcloud video for setting up the CAS LP-1000 Deli Scale. It will fill in some blanks on how to setup and use the device. Some info may be missing from the video.
Video: https://www.youtube.com/watch?v=oELknnZr5aA
Prerequisites:
Microsoft Office (excel)
Windows Computer (not the Point-Of-Sale)
Deli Scale
LP-Works Software
USB Serial Driver (if using USB)
https://ftdichip.com/wp-content/uploads/2021/02/CDM21228_Setup.zip
Alternative: http://www.cas-usa.com/cas-usa.com/media/USB%20Driver.zip
Instructions:
Import Excel Template File (xls NOT xlsx)
Download and install the LP Works Software
Connect the Device to Windows (USB)
Download and install the Drivers (if the device has a yellow exclamation in Device Manager, meaning it is unrecognized)
Change the BaudRate in Windows DeviceManager to 9600
Change the BaudRate in LP Works (config) to 9600 (Press save even if it is 9600)
Change the BaudRate on the device (below) to 9600
Fill in the template file with your values
Save the file as xls
Import the file into LP Works
Make sure the computer is Connected to the Scale
Press Download to dl the data to the scale
How to program baud rate
1) To go to PROGRAM mode, press 1 by using numeric keys and MODE key.
2) Press v key five times.
3) The WEIGHT display shows “SEt”.
4) Press PRT/* key, “SEt EntEr”.
5) Press 9 key and PRT/* key.
6) The display shows “bAUd EntEr 3=9600”.
7) Look at table below and type number that you want.
‘1’ = 2400bps
‘2’ = 4800bps
‘3’ = 9600bps
‘4’ = 19200bps
‘5’ = 38400bps
‘6’ = 57600bps
8) Press PRT/* key. The display shows “SEt”.
9) If you wish to finish PROGRAM mode, press C key