1. How to find the IP Address assigned to PAX S300 Devicez

    1. Click the Menu button on the PAX terminal screen or press the "FUNC" and "1" buttons at the same time

    2. Enter your password (default password is usually today's date in MMDDYYYY format.)

    3. Scroll down one page, and click on "2. Communication"

    4. Enter your password

    5. Scroll down one page and click on "3. LAN Parameters"

    6. Click on "2. IP Address"

    7. IP address is displayed

  2. How to find the Subnet Mask assigned to PAX S300 Device

    1. Click the Menu button on the PAX terminal screen or press the "FUNC" and "1" buttons at the same time

    2. Enter your password (default password is usually today's date in MMDDYYYY format.)

    3. Scroll down one page, and click on "2. Communication"

    4. Enter your password

    5. Scroll down one page and click on "3. LAN Parameters"

    6. Click on "3. Subnet Mask"

    7. Subnet Mask is displayed

  3. How to find the Gateway IP assigned to PAX S300 Device

    1. Click the Menu button on the PAX terminal screen or press the "FUNC" and "1" buttons at the same time

    2. Enter your password (default password is usually today's date in MMDDYYYY format.)

    3. Scroll down one page, and click on "2. Communication"

    4. Enter your password

    5. Scroll down one page and click on "3. LAN Parameters"

    6. Click on "4. Gateway IP"

    7. Gateway IP is displayed

  4. How to find the DNS IP assigned to PAX S300 Device

    1. Click the Menu button on the PAX terminal screen or press the "FUNC" and "1" buttons at the same time

    2. Enter your password (default password is usually today's date in MMDDYYYY format.)

    3. Scroll down one page, and click on "2. Communication"

    4. Enter your password

    5. Scroll down one page and click on "3. LAN Parameters"

    6. Scroll down one page

    7. Click on "2. DNS IP"

    8. DNS IP is displayed

 

  1. How to find the Secondary DNS IP assigned to PAX S300 Device

    1. Click the Menu button on the PAX terminal screen or press the "FUNC" and "1" buttons at the same time

    2. Enter your password (default password is usually today's date in MMDDYYYY format.)

    3. Scroll down one page, and click on "2. Communication"

    4. Enter your password

    5. Scroll down one page and click on "3. LAN Parameters"

    6. Scroll down one page

    7. Click on "3. DNS IP"

    8. Secondary DNS IP is displayed

  2. How to verify if POS & Pax devices are on the same network

    1. Test using a weblink

      1. Make sure PAX device and Laptop or Desktop are on same network

      2. Open a Browser and enter this link . http://192.168.1.1:10009?AlQwMBwxLjI4HDAxHDEwMBwcMRwcHBwcA0M=

      3. Make sure you replace the IP address in red above, with the static IP address from your PAX device.

      4. You should see a message for $1.00 Sale on the PAX terminal and proceed as per the instructions on the Terminal.


Additional steps available in the Direct to Processor guide